基于3D打印技术制造柔性传感器研究进展

与传统的涂覆、沉积等加工手段相比，使用3D打印技术可制造复杂立体功能结构的传感器，将3D打印与柔性传感技术结合可以促进未来生物医疗、人工智能等领域的发展。本文介绍了国内外基于3D打印技术制造柔性传感器的最新进展，其中包括聚酰亚胺等多种基底材料、纳米金属等多种打印传感材料；按照熔融沉积、黏弹性墨水沉积、粉末烧结熔化、还原光聚合和材料喷射的制造原理分别阐述了多种传感器的材料选择、成型特点，并对制造方法进行总结分析。虽然3D打印制造柔性传感器件存在着缺乏行业标准及多种类打印材料等问题，但经过不断创新与发展，3D打印将成为柔性传感领域极佳的制造手段。     

硅渣和玻璃粉直接烧结制备多孔材料的气孔结构与力学性能

以硅渣和玻璃粉为原料,采用粉体直接烧结法制备多孔材料,研究了烧结温度(700~900℃)、烧结时间(15~120min)和升温速率(10~100℃·min^-1)对多孔材料表观密度、气孔率、物相组成、抗压强度的影响。结果表明:气孔结构均匀性随烧结温度的升高而降低;表观密度随烧结温度的升高先减小后增大,随保温时间的延长而增大,随升温速率的增大而减小,气孔率的变化趋势与表观密度的相反;多孔材料的主要物相为玻璃相和硅、SiC、SiO2、Ca2Al2SiO7等结晶相,且结晶度随烧结温度的升高而降低;抗压强度随烧结温度的升高呈先增大后减小的趋势;当烧结温度为750℃,升温速率为30℃·min^-1,烧结时间为30 min时,多孔材料的主晶相为硅和Ca2Al2SiO7,抗压强度最大(1.60MPa),表观密度为0.43g·cm^-3,气孔率为80%。     

Review of the phase change material (PCM) usage for solar domestic water heating systems (SDWHS)

The shortage in energy resources combined with the climb in greenhouse emissions is the main incentive beyond the deployment of solar energy resource in various applications. One of the most successful applications is the utilization of solar energy in the domestic water heating systems (DWHS) because 70% of the consumed energy in the residential segment is utilized for space heating and appliances in cold climates 1 . However, the full deployment of solar energy in domestic water heating is only possible when an energy storage system with acceptable price is available. Recently a new tendency for deploying phase change materials (PCMs) as an energy storage system is introduced in several solar DWHS. These systems are known as integrated PCM in solar DWHS and offer several advantages including high storage capacity, low storage volume, and isothermal operation during the charging and discharging phases. The present study reviews various techniques utilized for integrating the PCM in solar water heating systems and the utilized methods for enhancing the heat transfer characteristics of the PCM through the usage of extended surfaces and high conductive additives. Copyright © 2017 John Wiley & Sons, Ltd.     

基于复合相变材料的梯级组合蓄热特性研究

针对潜热蓄热装置内部相变材料（PCM）导热系数偏小，蓄热速率过低的问题，对基于复合相变材料的两级串联式梯级蓄热装置的相变过程进行了数值研究。通过对不同热物性PCM工况的对比与分析，得到了装置在不同工况下的蓄热特性。结果表明，存在最佳的热扩散系数，使固定熔点的PCM实现“均匀等速相变”。同时，增大PCM的热扩散系数可以有效降低加热面温度，但随着热扩散系数的增大，加热面温度降低幅度减小。通过分析Stefan数，得到了装置最佳的参数，使工况蓄热效果最佳。最后，通过Stefan数为2.88时的实验工况验证了相关规律的正确性。     

Y_2P_4O_(13):Eu~(3+)荧光材料的制备及其性能

采用湿化学法制备了Eu~(3+)掺杂Y_2P_4O_(13)荧光材料,通过X射线粉末衍射(XRD)、傅里叶变换红外光谱(FT-IR)和荧光光谱(FL)等手段表征制备产物的物相结构、荧光性能,并对合成原料中稀土与磷的比例(n(Y+Eu)/n(P))和pH调节剂种类对制备样品的物相结构及性能的影响进行分析。结果表明:合成原料中n(Y+Eu)/n(P)比值和pH调节剂种类直接影响着制备产物的物相结构与性能。在n(Y+Eu)/n(P)=12.1、以NH_4HCO_3为pH调节剂调节pH为6的条件下可获得正交晶系的Eu~(3+)掺杂Y_2P_4O_(13)荧光材料。所制备的Y_2P_4O_(13):2at%Eu~(3+)荧光材料在395nm光的激发下可发射出橙红光。     

Fabrication of TiO2 photocatalytic electrode and contamination control with atmospheric pressure O2 plasma jet

In this study, we demonstrate the fabrication of TiO₂ photocatalytic electrode by sol-gel and electrospinning technique. The anatase TiO₂ nanofiber is successfully formed after thermal annealing at 260°C. As-prepared TiO₂ photocatalytic electrode contains surface contamination, which includes a polymer binder such as ethyl cellulose, carbon by carbonization of polyvinylpyrrolidone, and residue polyvinylpyrrolidone. To efficiently remove the surface contaminants from the TiO₂ photocatalytic electrode, we employ an atmospheric-pressure O₂ plasma jet and the exposure time is controlled by the scanning rate. As the results, photodegradation efficiency of methylene blue is significantly enhanced with a scanning rate in the range of 100-500 μm/s and was saturated with a scanning rate in the range of 10-100 μm/s.     

木质素化学降解及其在聚合物材料中应用的研究进展

木质素是自然界储量丰富的可再生天然酚类高分子，可替代传统化石资源应用于聚合物材料合成。木质素分子结构中的大分子刚性骨架可赋予材料独特的力学性能和热稳定性。但木质素化学组成和分子结构复杂、反应活性低，限制了在聚合物材料领域的应用。化学降解是一种高效、高选择性且应用广泛的降解方法，经化学降解处理得到的木质素低聚物具有活性官能团多、反应活性高、溶解性好等优点，有利于拓展木质素在聚合物材料领域的高附加值应用。重点综述了近年来国内外有关木质素化学降解及其降解产物应用于聚合物材料的研究进展。     

Self-Adaptive Control System for Additive Manufacturing Using Double Electrode Micro Plasma Arc Welding

Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the con-trol system's performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part's layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.     

Design of a Multilayered Oxygen-Evolution Electrode with High Catalytic Activity and Corrosion Resistance for Saline Water Splitting

The realization of seawater electrolysis requires high-performing anode materials that should possess good catalytic activity, stability, and specificity for the oxygen evolution reaction (OER) as well as high resistance toward chloride corrosion. Herein, the design of a multilayered oxygen-evolution electrode is reported to meet the multiple needs of anode material for saline water splitting. The multilayered electrode is synthesized through direct thermal boronization of commercially available NiFe alloy plate with boron powder, followed by electrochemical oxidation. And this electrode is composed of the surface oxidized NiFeBx alloy layer, the NiFeBx alloy interlayer, and the NiFe alloy substrate. The boron species are present in the form of metaborate in the outermost oxidized NiFeBx layer, and their existence is conductive to the generation and stabilization of the catalytic active phase γ-(Ni,Fe)OOH. The introduction of NiFeBx interlayer effectively prevents the excessive oxidative corrosion of the anode material in the electrolyte containing chloride ions.     

生物基异己糖醇聚酯的制备及其构效关系研究进展

异己糖醇是一类碳水化合物衍生二元醇,具有高刚性、手性、亲水性和低毒等特性,在制备新型生物基、生物可降解高分子材料方面具有广阔的发展前景。围绕近年来研究较为充分的全脂肪型及半芳香型异己糖醇基均聚酯与共聚酯,综述了其合成、热学性能、力学性能、生物降解性能及潜在应用,探讨此类聚酯的高效聚合反应工艺及构效关系。异己糖醇结构单元的引入可有效提高聚合物的玻璃化转变温度,以及促进其水解和生物降解性能,在构建具有更高性能的环境友好型聚酯方面具有较高潜力,有望应用于工程塑料、纤维、生物医药等领域。此类生物基聚酯的大规模商业化需进一步开发更高效、温和的聚合反应工艺以攻克其热敏感和热降解问题。